SACRAMENTO, California — Nearly 80,000 Pacific Gas and Electric (PG&E) customers lost electricity during a major Public Safety Power Shutoff (PSPS) event across Northern California and other parts of California in October 2026. The precautionary shutoffs were implemented amid forecasts of strong, dry winds that increased the risk of wildfires.
The event began on Wednesday, October 14, and was expected to continue through Saturday, October 17. PG&E initially placed approximately 88,000 customers across 29 counties within the potential shutoff area. As the event developed, the number of customers who actually lost power changed with weather conditions and operational decisions.
Importantly, this was a past event, not an ongoing outage as of November 16, 2026. PG&E reported on October 17 that virtually all customers affected by the safety shutoff had been reconnected.
Key Details of the October 2026 PG&E Outage
-
Utility provider: Pacific Gas and Electric (PG&E)
-
Reason: Public Safety Power Shutoff due to elevated wildfire risk
-
Event began: Wednesday, October 14, 2026
-
Potential impact: Approximately 88,000 customers across 29 counties
-
Reported outage figure: 79,978 customers without power in a subsequent update
-
Expected event window: Through Saturday, October 17
-
Final restoration update: Virtually all affected customers restored by October 17
Why Did PG&E Shut Off Power?
PG&E initiated the PSPS event because of forecasts for a dry offshore wind system, strong gusts, and low humidity. These conditions can increase the possibility that electrical equipment or damaged power lines could ignite vegetation and start a wildfire.
A Public Safety Power Shutoff is a preventive measure. Rather than waiting for equipment damage or a fire to occur, the utility can temporarily de-energize selected lines in areas considered at elevated risk.
PG&E said its assessment considered changing weather forecasts, fire-risk modeling, and conditions across its service territory. The utility described the shutoff as a last-resort safety measure within its broader wildfire-prevention strategy.
Timeline of the PG&E Power Shutoffs
October 13: Customers Receive Advance Notifications
PG&E notified customers in targeted areas that their electricity might be turned off as the forecasted wind event approached. At that stage, approximately 70,000 customers across 29 counties were potentially in scope.
October 14: Planned Shutoffs Begin
As the weather outlook developed, PG&E expanded the potential scope to approximately 88,000 customers. The company began turning off electricity for safety during the evening of October 14.
October 15: Nearly 80,000 Customers Reported Without Power
The number of affected customers increased as additional circuits were de-energized. A report published by KCRA cited approximately 79,978 customers without electricity in an update during the event.
The shutoffs affected communities across multiple counties, including areas in the Sierra Nevada and the greater Northern California region.
October 16: Restoration Work Continues
As weather conditions improved in some areas, crews inspected power lines and equipment before restoring electricity. PG&E reported that more than 66,000 customers had been reconnected by 7:30 p.m. Friday.
October 17: PG&E Reports Near-Complete Restoration
By Saturday morning, PG&E said more than 86% of customers who experienced a temporary safety-related outage had been restored. At 7:30 a.m., approximately 11,400 customers remained without power, primarily in Santa Barbara, San Luis Obispo, and Kern counties.
By 7:20 p.m. Saturday, PG&E reported that virtually all customers whose power had been proactively shut off had been restored.
Counties and Communities Affected
The October event covered portions of 29 counties, with the affected areas changing as PG&E monitored weather conditions and adjusted its shutoff plans.
The utility’s updates identified communities and counties across Northern California, including Placer, El Dorado, Yuba, Butte, Shasta, Nevada, Sierra, Amador, Calaveras, and Tuolumne counties. Other affected areas extended into the North Bay, East Bay, and parts of the Central Coast and southern California.
The event was not limited to Sacramento itself. Residents in the greater Sacramento region and surrounding counties were among those who needed to monitor PG&E’s notices and restoration updates.
PG&E Restoration Efforts and Customer Assistance
Before restoring electricity, utility crews had to patrol and inspect de-energized power lines and equipment. These checks were necessary to identify damage, fallen branches, trees touching lines, and other hazards that could make it unsafe to reconnect customers.
PG&E also announced that more than 40 Community Resource Centers would be available across 25 counties. These centers offered resources such as device charging, Wi-Fi, bottled water, snacks, and other supplies.
Customers needing additional assistance during the event were encouraged to contact 211, text “PSPS” to 211, or visit 211.org.
What Residents Should Know About Future PG&E Outages
Customers can check their address and review outage information through PG&E’s official outage resources. During a future PSPS event, residents should:
-
Keep mobile phones and essential medical devices charged.
-
Maintain flashlights, batteries, and emergency supplies.
-
Make arrangements for refrigerated medication and other temperature-sensitive necessities.
-
Follow official utility and local emergency-management updates.
-
Treat dark traffic signals as four-way stops and proceed cautiously.
-
Make backup arrangements if electricity is essential for medical equipment.
Customers can visit PG&E’s official outage and safety information for current service information and preparedness guidance.
Frequently Asked Questions
Why did PG&E shut off power in October 2026?
PG&E implemented a Public Safety Power Shutoff because forecasted strong, dry winds and low humidity increased wildfire risk in parts of its service territory.
How many customers were affected?
Approximately 88,000 customers were initially included in the potential shutoff area. A subsequent report recorded 79,978 customers without power during the event.
Did the outage affect Sacramento?
The shutoffs covered parts of several Northern California counties, including counties in the greater Sacramento region. The event was regional rather than a single outage confined to Sacramento.
Was power restored by Saturday, October 17?
Yes. PG&E reported at 7:20 p.m. on October 17 that virtually all customers affected by the planned safety shutoff had been restored.
Is the October 2026 PG&E outage still ongoing?
No. The October 14–17 event had ended, with PG&E reporting near-complete restoration on October 17. Customers should consult the official outage map for any separate or newer interruptions.
Disclaimer
This article summarizes a historical PG&E Public Safety Power Shutoff event using utility updates and news reports available at the time of writing. Outage figures and restoration estimates changed as conditions developed. Readers should consult PG&E and local emergency authorities for current information. This report is intended for general informational purposes.

Leave a Reply